Skip to content
CircuitKitBy Crafter Lab
EditorGalleryLesson
← Back to collection
Example / loaded-divider / geist-darkExpectation matched

Lightly loaded divider

Three resistors: a top series leg feeds the bottom resistor and a separate parallel load, sharing output and ground nodes. A 100 kΩ load parallels a 10 kΩ bottom leg; the explicit branch is retained, not treated as open circuit.

parallelbranchsharedgroundloadingthree-resistorsvaluesideal-limitations
Actual core output / SVGloaded-divider/light-load/geist-dark
Lightly loaded dividerLightly loaded divider. R1: resistor, 10 kΩ. R2: resistor, 10 kΩ. RL: resistor, 100 kΩ. ground: GND connected to R2.b connected to RL.b. input: R1.a connected to VIN. output: R1.b connected to R2.a connected to RL.a connected to VOUT. VOUT/VIN = (Rbottom || Rload)/(Rtop + (Rbottom || Rload)). Ideal resistors with an explicit parallel load; not an unloaded divider.. Focus components: none. Focus nets: none.

Scroll horizontally on smaller screens to inspect legible nodes and labels. No simulation is performed.

The original input stays intact, including invalid fields.

Open in editorDownload JSONDownload SVG ↓
Expected vs. actual

An inspectable result.

These checks compare the renderer outcome with the declared case expectation. The stress test also checks determinism, geometry, and connectivity.

Expected
Successful SVG render
Actual
SVG rendered0 diagnostics
Case check
Passed
Recipe / theme
Loaded voltage dividergeist-dark
The circuit graph, not its drawing

Electrical nodes & connectivity

Each net is one electrical node: the named endpoints below are connected. Component pins and external ports are endpoints. These counts are not the number of geometric junction dots or wire bends. No voltages, currents, or simulation results are inferred.

Components
3
Electrical nodes / nets
3
Component pins
6
External ports
3
Connected endpoints
9
Electrical nodes from normalized circuit.nets
Net / electrical nodeEndpointsConnected component pins and ports
ground3
  • GND
  • R2.b
  • RL.b
input2
  • R1.a
  • VIN
output4
  • R1.b
  • R2.a
  • RL.a
  • VOUT
Structured feedback

Diagnostics / 0

No diagnostics. The renderer accepted this source and produced the figure above.

Original figure document · JSON
{
  "version": 1,
  "circuit": {
    "components": {
      "R1": {
        "type": "resistor",
        "resistance": 10000
      },
      "R2": {
        "type": "resistor",
        "resistance": 10000
      },
      "RL": {
        "type": "resistor",
        "resistance": 100000
      }
    },
    "ports": {
      "VIN": {
        "kind": "terminal"
      },
      "VOUT": {
        "kind": "terminal"
      },
      "GND": {
        "kind": "ground"
      }
    },
    "nets": {
      "input": [
        "VIN",
        "R1.a"
      ],
      "output": [
        "R1.b",
        "R2.a",
        "RL.a",
        "VOUT"
      ],
      "ground": [
        "R2.b",
        "RL.b",
        "GND"
      ]
    }
  },
  "layout": {
    "preset": "loaded-divider",
    "roles": {
      "top": "R1",
      "bottom": "R2",
      "load": "RL",
      "input": "VIN",
      "output": "VOUT",
      "ground": "GND"
    }
  },
  "presentation": {
    "title": "Lightly loaded divider",
    "theme": {
      "preset": "geist-dark"
    }
  }
}
Expected outcome & actual diagnostics · JSON
{
  "id": "loaded-divider/light-load/geist-dark",
  "expectation": {
    "kind": "render"
  },
  "actual": {
    "ok": true,
    "diagnostics": []
  },
  "passed": true
}
Rendered bounds & renderer version · JSON
{
  "rendererVersion": "0.1.0",
  "bounds": {
    "x": 0,
    "y": 0,
    "width": 1400,
    "height": 1000,
    "labels": {
      "title": {
        "x": 67.128,
        "y": 57.82599999999999,
        "width": 327.0120000000001,
        "height": 29.682000000000002
      },
      "subtitle": {
        "x": 65.38,
        "y": 104.33500000000001,
        "width": 153.13499999999993,
        "height": 13.094999999999999
      },
      "formula": {
        "x": 64.6,
        "y": 920,
        "width": 680.1999999999999,
        "height": 18
      },
      "assumption": {
        "x": 65.288,
        "y": 956.046,
        "width": 428.75000000000017,
        "height": 12.13799999999992
      },
      "VIN:port": {
        "x": 162.6,
        "y": 251.8,
        "width": 34,
        "height": 14.199999999999989
      },
      "VOUT:port": {
        "x": 1076.6,
        "y": 251.48,
        "width": 46.600000000000136,
        "height": 14.840000000000003
      },
      "R1:id": {
        "x": 390.46,
        "y": 222.22,
        "width": 19.260000000000048,
        "height": 12.780000000000001
      },
      "R1:value": {
        "x": 365.44,
        "y": 245.576,
        "width": 70.34400000000005,
        "height": 17.80800000000002
      },
      "R2:id": {
        "x": 651.26,
        "y": 492.932,
        "width": 19.43999999999994,
        "height": 13.067999999999984
      },
      "R2:value": {
        "x": 651.44,
        "y": 516.576,
        "width": 70.34399999999994,
        "height": 17.807999999999993
      },
      "RL:id": {
        "x": 951.26,
        "y": 493.22,
        "width": 19.25999999999999,
        "height": 12.779999999999973
      },
      "RL:value": {
        "x": 951.44,
        "y": 516.576,
        "width": 84.74399999999991,
        "height": 17.807999999999993
      },
      "GND:port": {
        "x": 800.646,
        "y": 767.658,
        "width": 29.307999999999993,
        "height": 12.614000000000033
      }
    },
    "symbols": {
      "R1": {
        "x": 338.5,
        "y": 284.5,
        "width": 123,
        "height": 31
      },
      "R2": {
        "x": 584.5,
        "y": 458.5,
        "width": 31,
        "height": 123
      },
      "RL": {
        "x": 884.5,
        "y": 458.5,
        "width": 31,
        "height": 123
      },
      "GND": {
        "x": 729.5,
        "y": 758.5,
        "width": 41,
        "height": 31
      }
    },
    "routes": {
      "input": [
        {
          "x": 178.5,
          "y": 298.5,
          "width": 163,
          "height": 3
        }
      ],
      "output": [
        {
          "x": 458.5,
          "y": 298.5,
          "width": 643,
          "height": 3
        },
        {
          "x": 598.5,
          "y": 298.5,
          "width": 3,
          "height": 163
        },
        {
          "x": 898.5,
          "y": 298.5,
          "width": 3,
          "height": 163
        }
      ],
      "ground": [
        {
          "x": 598.5,
          "y": 578.5,
          "width": 3,
          "height": 143
        },
        {
          "x": 598.5,
          "y": 718.5,
          "width": 303,
          "height": 3
        },
        {
          "x": 898.5,
          "y": 578.5,
          "width": 3,
          "height": 143
        },
        {
          "x": 748.5,
          "y": 718.5,
          "width": 3,
          "height": 43
        }
      ]
    }
  }
}
← Previous exampleLightly loaded dividergeist-lightNext example →Lightly loaded dividergeist-print
CircuitKit · By Crafter Lab

A drawing tool, not simulation, electrical-safety approval, or a fabrication system.

Apache-2.0Source on GitHub ↗